Please select To the mobile version | Continue to access the desktop computer version

Kaosun's CD Players

 Forgot password?
 Repair!
Search
View: 7046|Reply: 4

Sony D-50 no playback

[Copy link]

1

Threads

3

Posts

49

Credits

Newbie

Rank: 1

Credits
49
Post time 2019-03-21 07:45:27 | Show all posts |Read mode
I'd like to consult you on an issue I am trying to repair, the player starts spinning but stops after 2 seconds and shuts down.
What I checked to troubleshoot so far:
All voltages are good.
Focus check - looks fine using service mode, there is a red beam coming from the lens.
Only problem I found is APC overcurrent:
80mA instead 55mA (as noted on the laser sticker KSS-110C).

At this point the service Manual suggest a laser replacement.
I'm not quite sure it's needed.
Is there another common issue that might be worth looking at?
Maybe something in the laser path or APC circuit could be out of place?

I appreciate your time and any reply with tips from your experience would be much helpful.
Thanks,
EK
Reply

Use magic Report

625

Threads

988

Posts

5915

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
5915
Post time 2019-04-05 21:20:15 | Show all posts
Issue is no disc detected? If it's a laser issue, a laser diode replacement can be performed here. Pls refer to other threads in this forum regarding repair of KSS110.
Reply Support Not support

Use magic Report

1

Threads

3

Posts

49

Credits

Newbie

Rank: 1

Credits
49
 Author| Post time 2019-04-07 02:09:49 | Show all posts
Edited by ElectroKid at 2019-04-07 04:54
kaosun 2019-04-05 21:20
Issue is no disc detected? If it's a laser issue, a laser diode replacement can be performed here. P ...

No disc detection is the failure:
The carriage works and moves to the limit switch at the edge, the spindle spins the disc, but disc cannot be read, 00 appears on the display for 4 seconds and then unit shuts off.
Reply Support Not support

Use magic Report

1

Threads

3

Posts

49

Credits

Newbie

Rank: 1

Credits
49
 Author| Post time 2019-04-10 04:11:27 | Show all posts
Edited by ElectroKid at 2019-04-10 04:12

Well, I don't know if it's a laser issue because I can see a red beam of light from the lens...
How can I tell for sure if the laser module is at fault or else it is something different?
I'd appreciate if you can point me to the relevant forum pages to determine which section of the player is bad when there is 'No CD Detection':  Laser or PCB components.
Thanks
Reply Support Not support

Use magic Report

625

Threads

988

Posts

5915

Credits

Administrator

Rank: 9Rank: 9Rank: 9

Credits
5915
Post time 2019-04-13 19:35:46 | Show all posts
ElectroKid 2019-04-10 04:11
Well, I don't know if it's a laser issue because I can see a red beam of light from the lens...
How  ...

I believe the issue is caused by a failure laser. If possible, you can replace the laser by a confirmed working one to ensure it's bad. Then you can try to replace it or repair it.
Reply Support Not support

Use magic Report

You have to log in before you can reply Login | Repair!

Points Rules

Archiver|Mobile|Dark room|Kaosun's CD players

2024-03-29 08:32 GMT-6 , Processed in 0.020139 second(s), 20 queries .

Powered by Discuz! X3.4

Copyright © 2001-2020, Tencent Cloud.

Quick Reply To Top Return to the list